DuraTech Model 2009 Industrial Tub Grinder is the perfect machine if you are looking to start up a grinding business. The 2009 can grind logs up to 18 inches in diameter. The 2009 is an efficient, economical grinder powered by a 325 horsepower (242.4 kw) C9 Caterpillar diesel engine, and perfect for grinding jobs that do not require high horsepower. It features a PT Tech self-adjusting, microprocessor controlled clutch, connected to a heavy-duty mill, and is designed for tough grinding jobs at an affordable price.


General Specifications (Model 2009)

WEIGHT
Total 25,540 lbs. (11,584.75 kg)

TRANSPORT DIMENSIONS
Transport Width 8 ft. 6 in. (2.59 m)
Transport Length 27 ft. 5 in. (8.36 m)
Transport Height w/ Tub Cover 129.85 in. (329.82 cm)

ENGINE AND TRANSMISSION
Engine Caterpillar 325 HP C9 Tier III Electronic Diesel
Clutch PT Tech HPTO-12
Governor Electro-Hydraulic Load Sensing
Safety Switches Safety Shutdown

CHASSIS FEATURES
Axle 25,000 lbs. (11,339 kg) Single Axle
Electrical 12 volt machine
Tires (4) 255/70R X 22.5
Tounge Weight 6,000 lbs. (2,727 kg) Pintle Hitch
Fuel Capacity 100 Gallons (378.5 Liters)
Hydraulic Oil Capacity 50 Gallons (189.3 Liters)
Lights Clearance, Directional
Brakes Air

TUB
Tub Width 9 ft. 6-3/8 in. (2.91 m) at Flare
Depth 3 ft. 4 in. (1.02 m)
Tub Diameter at Base 7 ft. 6 in. (2.27 m)
Tub Wall 3/16 in. (.476 cm) Thick
Tub Floor 1/4 in.(.635 cm) Thick
Tub Drive Hydraulic Orbit Motor
Tub Speed Sensor Electronic Self Governing

CONVEYORS
Discharge Conveyor 21 ft. 6 in. (6.55 m) Long Top Drive X 24 in. (60.96 cm) Wide
Belly Conveyor 30 in. (76.2 cm) Wide /w a V Cleat

HAMMERMILL
Hammers 20 Fixed Single Bolt Hammers, or 36 Swing Hammers
Length 40 in. (101.6 cm)
Cylinder Shaft 4-1/2 in. (11.43 cm) Stress Proof Steel
Cylinder Plates 16 in. (40.64 cm) Diameter X 1-1/2 in. (3.81cm) Thick
Hammermill Opening 41 in. (104.14 cm) X 25 in. (63.5 cm)
Screens 1 in. (2.54 cm) Thick Split Screens
Hammer Rods 1-1/2 in. (3.81 cm) Diameter
Bearings 3-1/2 in. (8.89 cm) Pillow Block Bearings
Hammermill Drive Direct Drive Torque Limiter

*2009 Tub Grinder Options

Hammer Options: (Must choose one)
(40) Swing Hammers
(20) Fixed Hammers

Screen Options: (Must choose one)
Screen 1″ Hole 1/2″ Thick Hardox w/ Doubler
Screen 1 1/2″ Hole 1/2″ Thick Hardox w/ Doubler
Screen 2″ Hole 1″ Thick
Screen 3″ Hole 1″ Thick
Screen 4″ Hole 1″ Thick
Screen 4 3/4″ x 7″ Hole 1″ Thick
Screen 6″ x 9″ Hole 1″ Thick

Hitch Options: (Must choose one)
Pintle Hitch
Fifth Wheel Hitch Air Brakes W/Fifth Wheel Hitch
Fifth Wheel Hitch Air Brakes W/Goose Neck Hitch

Discharge Conveyor Drive Roller: (Must choose one)
Top Drive Roller
Magnetic Roller 21′ 6″ Conveyor

Remote Control Option: (Must choose one)
No Remote Control
6 Function Tub: Start, Stop, Rev Cnvyr: Up, Down Eng: Kill
6 Function plus Cover: Raise, Lower

Tub Cover
An operational characteristic of all grinders is that objects may be thrown out of the tub. Tub Covers reduce the risk of potential injury or property damage from thrown objects. Proper use of the Tub Cover provides the operator with a means to help control the area over which thrown objects may fall. Combined with a decrease in the percentage of objects thrown from the tub, the Tub Cover is an effective means of reducing risk to personnel and property.

Call Now (352) 812-9197