DuraTech Model 3010 Industrial Tub Grinder is a mid-sized tub grinder that can handle logs up to 32” in diameter. This machine is a step above the 2009, and the perfect option when the 2009 cannot handle the task. The 3010 is among the most efficient and productive grinders on the market, and feature a 30″ (76.2 cm) wide oscillating stacking conveyor and self-cleaning radiator screen. It is powered by either a CAT C15 475 horsepower (354.21 kw) or 540 horsepower (402.68 kw) Tier III Diesel Engine, with a PT Tech Fluid Clutch system that drives a heavy-duty hammermill.


Weight 44,620 lbs. (20,239.3 kg)

Transport Width 8 ft. 6 in. (2.59 m)
Transport Height 11 ft. 4 in. (3.45 m)
Transport Length 36 ft. 3 in. (11.07 m)
Ground Clearance 13 1/3 in. (33.8 cm)

Tracks 20″ (50.8 cm) x 15″ (4.6 m) Steel Track (Will Climb 50% Incline Grade)
Electrical 24 volt machine
Engine: 475 hp (354.21 kW) CAT C15 Tier III
540 hp (402.68 kW) CAT C15 Tier III
Clutch HPTO 14 Wet Clutch
Fuel Capacity 160 Gallons (605.6 Liters)
Hydraulic Oil Capacity 50 Gallons (189.3 Liters)

Tub Width 10 ft. (3.05 m)
Depth 46 in. (116.84 cm)
Tub Diameter at Base 8 ft. (2.44 m)
Tub Wall 1/4 in. (.635 cm) Thick
Tub Floor 3/8 in. (.953 cm) Thick
Tub Drive Direct Hydraulic Motor
Service Access 90° Tilting Tub
Tub Speed Sensor Electronic Self Governing

Stacking Conveyor 10 ft. 6 in. L x 30 in. W x 8 in. D
(3.2 m L x 76.2 cm W x 20.3 cm D))
Belly Conveyor 30 in. (76.2 cm) Wide Impact Resistant

Hammers 20 Fixed Single Bolt or 40 Swinging
Rotor – Shaft Diameter 6 in. (15.24 cm) Stress Proof Steel
Rotor Length 44 in. (111.76 cm)
Rotor Plates 16 in. (40.64 cm) Diameter x 1-1/2 in. (3.81 cm) Thick
Feed Opening 45 in. x 25 in. (114.3 cm x 63.5 cm)
Screen Area 2,403 Square Inches (15,503.19 sq. cm.)
Hammer Rods (8) – 1-1/2 in. (3.81 cm) Diameter 43 in. (109.22 cm) Long
Bearings 4 in. (10.16 cm) Pillow Block Bearing
Screens Split Screens 1 in. (2.54 cm) Thick
Hammermill Drive Direct Drive through HPTO Oil Cooled Clutch

3010 Track Tub Grinder Options

Hammer Options: (Must choose one)
(38) 3/4″ x 3″ Swing Hammers
(38) 1″ x 3″ “Supreme” Swing Hammers
(20) Fixed Hammers

Screen Options: (Must choose one)
Screen 1″ Hole 1/2″ Thick Hardox w/ Doubler
Screen 1 1/2″ Hole 1/2″ Thick Hardox w/ Doubler
Screen 2″ Hole 1″ Thick
Screen 3″ Hole 1″ Thick
Screen 4″ Hole 1″ Thick
Screen 4 3/4″ x 7″ Hole 1″ Thick
Screen 6″ x 9″ Hole 1″ Thick

Discharge Conveyor Drive Roller: (Must choose one)
Top Drive Roller
Magnetic Roller Complete w/ Aluminum Deflector Chute

The standard 30″ (7.62 cm) Wide by 26′ (7.92 m) Long Stacking Conveyor may be ordered as an option.

Remote Control Option: (Must choose one)
No Remote Control
6 Function Tub: Start, Stop, Rev Cnvyr: Up, Down Eng: Kill
6 Function plus Cover: Raise, Lower

Mill Cover

Lockable Steel Toolbox

12′ Tub Flare Extension (unavailable w/tub cover)

Tub Agitator Kit

Hammer Rod Puller

Tub Cover
An operational characteristic of all grinders is that objects may be thrown out of the tub. Tub Covers reduce the risk of potential injury or property damage from thrown objects. Proper use of the Tub Cover provides the operator with a means to help control the area over which thrown objects may fall. Combined with a decrease in the percentage of objects thrown from the tub, the Tub Cover is an effective means of reducing risk to personnel and property.

Call Now (352) 812-9197