DuraTech’s 2009 Tub grinders just became stationary! The versatile 2009 Tub grinder is now available with electric motor drives. A 400 hp soft start main drive motor as well as a 75 hp motor to power the hydraulic system are available in various voltages to fit your power grid specifications. These Electric motors provide steady power with no emissions, little maintenance, and reduced noise levels.

The PT Tech Torque limiter protects the motor and hammermill from overloads, and costly repairs. The stationary units are available as skid mounted units or as a mobile unit with a pintle hitch. The 2009 Electric produces ground product at the same consistent rate as its diesel powered counterpart. Heavy duty hammermill, tilting tub for easy access for service and maintenance, and the governor controlled tub speed are all benefits that will make owning a 2009 Electric tub grinder from DuraTech a profitable investment.

General Specifications (Model 2009EL)

Motor-Main Drive 400hp/380V/50HZ
Motor-Hydraulic Drive 75hp/380V/50HZ
Motor-Main Drive 400hp/4600V/60HZ
Motor-Hydraulic Drive 75hp/460V/60HZ
Hydraulic Oil Capacity 50 Gallons (189.3 Liters)
Tub Governor Electro-Hydraulic Sensing
Tub Speed Sensor Magnetic Sensor
Tub Width 9’ 6-3/8” (2.91 m) at Flare
Tub Depth 40” (1.02 m)
Tub Diameter at Base 7’ 6” (2.27 m)
Tub Wall 3/16” (.476 cm) Thick
Tub Floor 1/4” (.635 cm) Thick
Tub Drive Hydraulic Orbit Motor
Safety Switches Tub Tilt in relationship to Hammermill operation
Belly Conveyor 30” (76.2 cm) Wide
Discharge Conveyor 21’ 6” (6.55 m) Top Drive L- 24” (60.96 cm) Wide
Hammermill Opening 41” x 25” (104.14 cm x 63.5 cm)
Hammermill Drive Belt and pully through Torque Limiter
Rotor Length 40” (101.6 cm)
Rotor Plates 16” (40.64 cm) in Diameter 1” (2.54 cm) Thick
Rotor – Shaft Diameter 4-1/2” (11.43 cm) Stress Proof Steel
Bearings 3-1/2” (8.89 cm) Pillow Block Bearings
Hammer Rods 1-1/2” (3.43 cm) Diameter
Hammers 20 Fixed Single Bolt, or 40 swinging hammers
Screens 1” (2.54 cm) Thick Split Screens
Screen area 2,240 Sq in (14,451.6 sq cm)

Weight: With 460 volt motor 29,020 lbs. (1,163.25 kg) approximate
With 380 volt motor 30,120 lbs. (13,662.2 kg) approximate
Transport Width 8’4” (2.55 m)
Length 26’6” (8.07 m)
Height 10’10” (3.29 m)/td>

Width: With 460 volt motor 30,520 lbs. (13,843.64 kg)
With 380 volt motor 31,620 lbs. (14,434 kg)
Transport Width 8’4” (2.55 m)
Length 30’5” ( 9.28 m)
Height 10’10” (3.29 m)
Axle Tandem axles, 25,000 lbs (11,339.01 kg)
Tires (4) 445/50 R 22.5 Super Single
Tongue Weight 6,340 lbs (2,876 kg)
Brakes Air or Optional 24 Volt Electric
Electrical-trailer 12 Volt / 24 Volt
Lights Clearance, Directional and Brake

*2009 Electric Tub Grinder Options

Hammer Options: (Must choose one)
(40) Swing Hammers
(20) Fixed Hammers

Screen Options: (Must choose one)
Screen 1″ Hole 1/2″ Thick Hardox w/ Doubler
Screen 1 1/2″ Hole 1/2″ Thick Hardox w/ Doubler
Screen 2″ Hole 1″ Thick
Screen 3″ Hole 1″ Thick
Screen 4″ Hole 1″ Thick
Screen 4 3/4″ x 7″ Hole 1″ Thick
Screen 6″ x 9″ Hole 1″ Thick

Hitch Options: (Must choose one)
Pintle Hitch
Fifth Wheel Hitch Air Brakes W/Fifth Wheel Hitch
Fifth Wheel Hitch Air Brakes W/Goose Neck Hitch

Discharge Conveyor Drive Roller: (Must choose one)
Top Drive Roller
Magnetic Roller 21′ 6″ Conveyor

Remote Control Option: (Must choose one)
No Remote Control
6 Function Tub: Start, Stop, Rev Cnvyr: Up, Down Eng: Kill
6 Function plus Cover: Raise, Lower

Tub Cover
An operational characteristic of all grinders is that objects may be thrown out of the tub. Tub Covers reduce the risk of potential injury or property damage from thrown objects. Proper use of the Tub Cover provides the operator with a means to help control the area over which thrown objects may fall. Combined with a decrease in the percentage of objects thrown from the tub, the Tub Cover is an effective means of reducing risk to personnel and property.

Call Now (352) 812-9197